Continuous Emissions Analyzer

  • Home
  • Continuous Emissions Analyzer
Image

Continuos Emissions Analyzer Model ATS-208A

  • Microcontroller based embedded intelligent instrumentss
  • 128 x 64 Graphics LCD Display
  • Self diagnostic & Self integrity check
  • Direct Plug In or Auto Suction Sampling Mode
  • Long Life Rechargeable Li-Ione Battery
  • Data Logger with RS 232 and USB Computer Interface
  • Software solutions for Gas Analysis

Model ATS-202A is single of Multigas Portable Instrument for Bio Gas and process gas Analysis for various industries. Landfill gas and Bio gas is produced by the bio-degradation of waste. Landfill gas is produced from general waste buried in the ground; and bio-gas from plant and animal waste products contained in a sealed digester tank.

Both gases comprise mainly methane (CH4) and carbon dioxide (CO2). The methane component is either burnt as a fuel or flared off as waste.

Our landfill gas / Bio gas analysers maximise the extraction of energy and ensure it is safe to burn without explosion - (the explosion problem occurs if air, i.e. oxygen, infiltrates the gas).

Our Application specific Portable Gas Analyzers provides continuous process analysis of the following Gases.

Oxygen (O2), Carbon Monoxide (CO), Carbon dioxide (CO2), Sulphur Dioxide (SO2), Nitric Oxide (NO),Nitrogen Dioxide (NO2), Nitrous Oxide(N2O), Hydrogen (H2), Hydrogen Sulphide ( H2S) and Hydrocarbons.s

  • Biogas , Landfill and Digester
  • MAP (Food Gas Packaging)
  • Gasification & Syngas
  • Laboratories & Institutions
  • Treatment Process & Chemical Industries
  • Petrochemical & Pharmaceutical Industries
Principle Electrochemical and NDIR
Range %V/V & PPM
Resolution 0.1 Unit or 1 Unit (Application based)
Sampling Method Auto Suction or Direct Plug In
Display 128 X 64 Graphics LCD
Alarm; Two Levels Low & High, Visual and Audible
Power Source Built in Lithium Rechargeable battery
Accuracy +/2%
Response Time <5 Second
Data Storage 5000 or 10000
Computer Interface S 232, USB, RS485
Sensor Life 2-3 Years
Operating Time 6 – 8 hours
Temperature 15degree Celsius
Humidity < 85%RH
Atmosphere Pressure 86 - 106Kpa
Housing High Impact Plastic
Dimension in mm 200 (W) X 120 (H) X 185(D)
Weight 1.5 KG
Warranty One Year