FIXED GAS DETECTION MODEL NO. ATS-105M
  • Microcontroller based embedded intelligent Monitor
  • 128 x 64 Graphics LCD Display
  • Data Logger with RS 232 and USB Computer Interface
  • Software solutions for Gas Analysis
  • Web based data transfer through GSM/GPRS Technology
  • Detection of combustible, toxic Gases and Oxygen
  • Non-intrusive calibration
  • Programmable relays
  • Available in stainless steel
  • Available in wireless version
  • Flame proof Junction Box Approval CCOE & CMRI

Discription:

Single Point Hazardous Gas Monitor/ Alarm for ambient air

Model ATS-105M is Single Point Hazardous Gas Monitor/ Alarm for ambient air. Model ATS-105 is suitable for Combustible gases (%LEL) or PPM level of CO, H2S, SO2, NO, NO2, CL2, B2H6, Hydrocarbons, organic solvents and other Toxic Gases.
 
The ATS-105M features a rugged, long-life Electrochemical, Catalytic Pellister, metal oxide semiconductor (MOS) sensor. The sensor is available either in a separate junction box for remote mounting up to several hundred Meters from the monitor, or as an integral component attached to the instrument. The ATS-105M provides a Graphics LCD display of gas concentrations, audio/visual alarms, relay contacts, plus analog (4-20mA ) and digital  RS 232/485 and USB outputs.
 
Accept Single 4-20 mA Input from Remote Sensor/Transmitter.

Multi Chanel Gas Monitor 

Model ATS-107M is Multi channel gas Monitor for environmental Monitoring and Leak detection. The ATS-107M  is an economical, yet versatile Multi channel controller with the features needed for monitoring a remote 4-20 mA gas sensor/transmitter or similar device. The instrument provides 24 VDC power, audio/visual alarms, alarm relays and other features. The ATS-107M  is easy to install, designed for wall mounting and completely programmable from the front panel membrane switches.

Accept Multi 4-20 mA Input from Remote Sensor/Transmitter.

Applications:

 
  • Environmental Monitoring
  • Area Monitoring
  • Leak Detection & Monitoring
  • Chemical Plants
  • Refineries/Petrochemical
  • Hazardous Area
  • Water/West water Treatment
  • Fire Services
  • Mines
 

Specifications:

 
Principle
  :     
Electrochemical, Solid State Semiconductor Catalytic and PID
Range
  :
PPM/PPB or mg/M3
Resolution
  :
0.1 Unit or 1 Unit (Application based)
Sampling Method
  :
Diffusion
Display
  :
128 X 64 Graphics LCD
Alarm
  : 
Relay Contact NO+NC
Anolog out Put
  : 
 4-20mA
Digital out Put
  : 
 RS 232, RS 485 and Modbus Communication Protocol 
Power Source
  :
230V AC
Accuracy
  :
+/2%
Response Time
  :
<5 Second
Data Storage
  :
1000 or 10000
Sensor Life
  :
2-3 Years
Environmental
 
 
Temperature
  :
15degree Celsius
Humidity
  :
< 85%RH
Atmosphere Pressure
  :
86-   106Kpa
Dimension in mm
  :
210 (W) X 180(H) X 110(D)
Weight
  :
1.2 KG
Warranty
  :
One Year